|
|
GRANULOMÈTRE POUR LES PHÉNOMÈNES DE COMBUSTION
Le spectromètre EEPS™ mesure la distribution de tailles de particules de 5,6 à 560 nm contenues dans les émissions d'échappement du moteur avec la résolution la plus rapide qui soit. Les utilisateurs peuvent visualiser et étudier le comportement dynamique des émissions de particules survenant pendant les cycles de test transitoire, pendant les toutes premières secondes d'un démarrage à froid ou pendant la régénération du piège ou du filtre. Il fonctionne sur une large plage de concentrations de particules pouvant descendre jusqu'à 200 particules/cm3. Il travaille à pression ambiante afin d'éviter l'évaporation des particules volatiles et semi-volatiles et ne requiert aucun consommable.
Son maniement facile est une de ses fonctions clé. Tous les composants, y compris la source d'aspiration à vide, se tiennent dans un boîtier unique de 32 kilos. Un microprocesseur mesure automatiquement la température et la pression barométrique afin de les convertir en écoulement volumétrique. Cet instrument peut être géré à distance et comprend des capacités logicielles sans précédent dans l'industrie.
Caractéristiques et points forts
- Mesure des particules de 5,6 à 560 nm
- 10 Hz de capacité de collecte de données permettant d'enregistrer les événements transitoires en temps réel
- Logiciel complet de collecte et analyse des données
- Utilisation facile
- Boîtier unique de seulement 32 kg.
Application
Contenu
- Logiciel de l'instrument de mesure de la taille des particules d'échappement du moteur
 |
Le spectromètre EEPS™ de TSI mesure la distribution de tailles de particules de 5,6 à 560 nm contenues dans les émissions d'échappement du moteur avec la résolution la plus rapide qui soit. |
 |
Ils sont compatibles avec une grande variété de compteurs et d'analyseurs de taille de particules TSI, notamment avec les systèmes de granulométrie SMPS, les spectromètres EEPS, les CPC et les détecteurs d'aérosols électriques. |
 |
Le diffuseur d'écoulement sépare un échantillon d'aérosols et pour en acheminer simultanément chaque partie à un maximum de quatre destinations. |
BROCHURESCATALOGUESFICHES TECHNIQUESINFORMATIONS SUR LE SERVICE
NOTES D'APPLICATIONSERVICE PROCEDURESSTANDARD REPLACEMENT PARTSFOIRE AUX QUESTIONSshow/hide all answers
- Can the Model 3090 measure exhaust directly from the tailpipe?
No. Like most other instruments, the EEPS™ spectrometer requires dilution before the hot engine exhaust particles are sampled. Many of the size distribution characteristics are determined by how the conditioning and sampling are done.
- Do I need to send the Model 3090 to TSI for recalibration?
The EEPS™ spectrometer can be cleaned and serviced in the field. Periodic service and calibration at a TSI facility is recommended to ensure accurate sizing.
- How do I know that particle size information is correct?
TSI's years of experience with the earlier electrical mobility systems have resulted in this new instrument for measuring particle sizes. Comparing the results of a stable aerosol size between a Scanning Mobility Particle Sizer™ (SMPS) and the EEPS™ spectrometer will assure that the particle sizing is correct. If there is a significant difference, see the troubleshooting section in the EEPS manual to identify likely sources of the problem.
- How do I know that the Model 3090 is working properly?
Built-in diagnostics indicate when air flows and charger or column voltages are out of specification and prevent operation if the conditions are not correct. Periodically running particle size standards will also ensure the system is sizing particles properly. Refer to the appropriate sections of the Model 3090 EEPS™ spectrometer manual.
- How do the Model 3090 results compare with other instruments that use different technology?
The standard for sizing engine exhaust particles is the TSI SMPS™ systems. The Model 3090 EEPS™ spectrometer uses a similar electrical mobility technique but with multiple sensors to get a much faster size distribution.
- How does the temperature and humidity affect the EEPS™ spectrometer measurement?
Temperature and relative humidity affects the formation of nucleation mode particles. If the temperature is too high, the electrometer response can be affected. Dilution and control of the sample temperature is necessary for consistent results.
- How is the Model 3090 calibrated?
The Model 3090 EEPS™ spectrometer is calibrated at the factory in Shoreview, and we will also have capacity for calibration in Germany and in the United Kingdom.
- What if the density is unknown?
As long as you are simply comparing results for consistency, a density value can be assumed. A constant density for all particle sizes can be easily entered into software. If the true density is determined later, or the assumption needs to be changed, the user can edit the density value at any time.
- What if the density setting is incorrect?
The density setting for each particle size can be set either before or after taking data. Tables of density settings (for different sizes) can be saved and loaded to quickly change density to that which controls the mass results.
- What test protocols can be performed with the Model 3090?
The instrument can do tests up to 90 minutes in length. If a test needs to be stopped early, a single mouse-click (or several key strokes) will stop data collection.
|